Shop Fox W1668 3/4 HP 13-Inch Bench-Top Oscillating Drill Press
Just like it’s little brother, this 12-speed drill press doubles as an oscillating sander that can be used for efficient contour sanding. With more speeds, more power and more capacity this machine becomes an effective tool for heavier use. The table has a clearance hole for use while sanding. This clever design incorporates a dust collection port so your sanding jobs are less messy. With a 3/4-inch drilling capacity in steel you’ll be able to tackle most any drilling job as well.
Tilting Table for Versatility of Applications
The W1668 offers the ability to tilt the table 90-degrees to both the left and right. You can adjust the table height and tilt to accommodate for workpiece height or achieve special drilling or sanding angles. You can also move the table out of the way and use the drill press base as a table for drilling or sanding.
Oscillating Feature for Sanding Operation
One of the great features of the Model W1668 13-1/4-inch Oscillating Drill Press is its sanding capability. The drill press can be converted from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps. Oscillation reduces heat build up and leaves a smooth finish when sanding. This drill press includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums.
Shop Fox offers a broad assortment of drill presses to suit every need – from small hobby shops to professional machine shop. Our unique oscillating models provide the convenience of two machines in half the space, our radial drill presses offer unmatched versatility. For the best selection of features, performance and value, look no further than Shop Fox.
Specifications and Features
- Motor: 3/4 HP, 110V, 1,725 RPM
- Overall height: 38-inches
- Spindle travel: 3-1/4-inch
- Swing: 13-1/4-inches
- Drill chuck: 5/8-inch
- Dust port size: 2-1/4-inch
- 12 Speeds: 250-3,050 RPM
- Table: Round 12-3/8-inch diameter
- Table swing: 360-degrees
- Table tilt: 45-degrees left & 45-degrees right
- Approx. shipping weight: 130 lbs.
- 2-inch table dust port
- Includes sanding drums
- Oscillating Spindle
Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM
Drill chuck: 5/8-Inch
Spindle travel: 3-1/4-Inch
Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums.