Shop Fox W1745 6-Inch Jointer with Mobile Base
The oversized fence in this 6-inch Jointer provides tremendous keep watch over for edge-jointing wide boards and features a rack and pinion adjustment mechanism. The fine-adjust handwheel dials in the outfeed table relative to the cutterhead top dead center. The lever-adjusted infeed table provides quick and accurate infeed table movement. Made of rugged cast iron. Top it all off with a built-in mobile base, and you have a jointer that has it all
Surface Planing, Edge Jointing Bevel Cutting or Rabbeting
The W1745 is able to a surface planing, edge jointing, bevel cutting and rabbeting with its fully adjustable 5-by-35-inch cast iron fence. Flatten the face of your workpiece to prepare it for surface planing on a thickness planer, square rough or warped stock for joinery and finishing, cut a specific angle into your workpiece or eliminate a section of the workpiece edge. All turn into easy tasks with the Shop Fox 6-inch Jointer.
Built-in Mobile Base with Locking Foot Pedal
The W1745 features a built-in mobile base with a locking foot pedal. Simply push the pedal down, move the machine where you wish to have it and move the pedal back up. Additional features include the 4-inch built-in dust collection hood and convenient pedestal mounted switch.
Solid Cast Iron Construction
The W1745 Shop Fox 6-Inch Jointer has been specially designed to offer many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality keep watch over program assure secure and reliable operation.
Specifications and Features
- Motor: 1 HP, 110V, single-phase
- Maximum stock width: 6-inch
- Maximum depth of cut: 1/8-inch
- Maximum rabbeting capacity: 1/2-inch
- Cutterhead diameter: 2-1/2-inch
- Knives: 3 (HSS) 6 x 5/8 x 1/8-inch
- Cutterhead speed: 4,800 RPM
- Table size: 6-by-46-inches
- Table height from floor: 32-1/2-inch
- Cuts per minute: 14,400
- Fence size: 5-inch H x 35-inch L
- Fence adjustment: positive stops at plus/minus 45 degrees and 90 degrees
- Overall dimensions: 46 L x 27-1/2 W x 37-1/4-inch H
- Approximate shipping weight: 270 lbs.
Motor: 1 HP, 110V, single-phase
Cutterhead diameter: 2-1/2-Inch, Cutterhead speed: 4,800 RPM, Knives: 3 (HSS) 6-Inch by 5/8-Inch by 1/8-Inch, Cuts per minute: 14,400
Maximum stock width: 6-Inch, Maximum depth of cut: 1/8-Inch, Maximum rabbeting capacity: 1/2-Inch
Table size: 6-Inch by 46-Inch (Height 32-1/2-Inch)
Fence size: 5-Inch H by 35-Inch L, Fence adjustment: positive stops @ ± 45 Degree and 90 Degree